injection-production ratio的意思|示意
注采比
injection-production ratio的网络常见释义
注采比 ...单井平均日注水量 N—全油田注水井数，口 Q y —产油量，t/d C—注水系数，取C=1.01.2 B—注采比(injection-production ratio) f w —含水率，%（重量百分比） B 0 —原油体积系数 0 —地面原油密度，t/m 3 w —注入水密度，t/m 3 Q w —全油田所需的...
injection-production ratio相关短语
1、 cumulative injection-production ratio 累积注采比
2、 injection production ratio model 注采比模型
3、 injection-production ratio model 注采比模型
injection-production ratio相关例句
When formation pressure decreases to around 0.85 times of saturation pressure, water should be injected with the injection-production ratio of some 1.0 to replenish energy.
并合理补充地层能量，地层压力降至0.85倍饱和压力附近时开始注水，注采比保持在1.0左右。
Different flooding pattern and different injection production ratio are used for different reservoirs to maintain the reservoir at a reasonable level.
根据不同的油藏类型采用不同的注水方式以及不同的注采比，确保油层在某一压力下生产。
The production pressure differential can be increased and the injection-production ratio can be reduced by transferring from flowing to pumping.
利用自喷转抽提液方法，放大生产压差，降低注采比。
The method is presented to determine formation average pressure and boundary pressure with threshold pressure gradient and injection-production ratio.
给出了考虑注采比和启动压力梯度的平均地层压力和边界压力的确定方法。
The concept of loss ratio of recovery factor and the influence of number ratio of injection-production Wells on it are advanced.
提出了采收率损失率的概念及注采井数比对采收率损失的影响。
Moderate water injection at low injection-production ratio should be implemented with restriction of injection strength of the fractured interval and reducing the probability of fracture opening.
采用低注采比政策，实施温和注水，限制压裂层注水强度，降低裂缝开启的几率；