in plane shear的意思|示意

The prediction result of the in plane shear modulus of a typical stitching foam-core sandwich composite was found good agree with the experimental results.

预测典型缝纫泡沫芯材的面内剪切模量，进行夹层结构的面内剪切试验，试验结果与预估结果吻合较好。

The results show that the frictions caused by the wall of shear box will influence the distributions of stresses in specimens and the normal pressure stresses on the shear plane.

结果表明，剪力盒壁摩擦力将会影响试验土样中的应力分布和剪切面上的正压应力值。

The failure criterion can be judged by the rectangle region in the graph of the relation between ultimate out-of-plane load and ultimate in-plane shear.

它的破坏状态可以用极限面外荷载和极限面面内剪力关系图中围成的矩形区域来判断。

The fatigue resistance of the butt welds can be improved by means of removing the weld reinforcement and designing the weld in the maximum shear stress plane.

去除焊缝余高或将焊缝设计在最大剪应力平面内可明显改善对焊接头的疲劳性能。

In this study, the interface failure under the joint action of constant compression and periodical anti-plane shear were investigated.

本研究利用“剪切梁”模型，研究了在定常侧压力和周期性的反平面剪切载荷共同作用下，层间界面的破坏规律。

A comprehensive study of free vibration, buckling and bending of anisotropic simply-supported skew plates subjected to in-plane normal and shear forces is conducted.

对简支各向异性平行四边形板在面内张力和剪力作用下自由振动、屈曲和弯曲问题作了全面的研究。