hot dip aluminizing的意思|示意

美 / / 英 / /

热浸镀铝,热浸渗铝


hot dip aluminizing的网络常见释义

热浸镀铝 【正文快照】: 1 引 言 热浸镀铝(Hot Dip Aluminizing)作为实施铝镀层的方法,除在基体表面形成具有耐蚀性的铝层外,还由于热扩散的作用在铝和铁之间形成了呈冶金结合的扩散层,所以镀...

热浸铝 热浸铝过程中表面层厚度动态控制模型 - TNMSC 关键字: 热浸铝;镀层; 动态控制; 流体力学[gap=1160]Key words: hot dip aluminizing; coating; dynamic control; fluid dynamics

hot dip aluminizing相关短语

1、 hot-dip aluminizing steels 热镀铝钢

2、 hot-dip aluminizing coat 热浸镀铝层

3、 hot dip aluminizing coating 热浸镀铝钢

hot dip aluminizing相关例句

Hot-dip galvanizing and hot-dip aluminizing are one of the most popular hot dipping technologies which are broadly used in society.

其中热镀锌和热浸铝技术是目前最常用的热浸镀技术之一,在生产生活中得到了广泛的应用。

There is amorphous phase in diffusion layer of the hot-dip La-aluminizing and the content of the amorphous phase increases due to the addition of rare earths la.

热浸镀铝-镧钢的扩散层中存在非晶态相,且稀土镧的添加可使扩散层中的非晶含量增加。

The results showed that the hot-dip aluminizing coatings on both the J55 and N80 steels were composed of aluminum layer and Fe-Al intermetallic compound layer.

结果表明:J55和N80钢热浸镀铝后的镀层组织均可分为纯铝层和铁铝金属间化合物层两层;

The composition and structure of hot-dip aluminizing samples are analyzed by using metallurgical microscope, SEM and XRD.

采用金相显微镜、扫描电镜、X射线衍射等研究手段,检测分析了浸铝镀层的成分和组织结构。

The research status about of the microstructure, formation mechanism and growth kinetics of hot dip aluminizing coating is reviewed. Research directions for hot-dip aluminized steel are suggested.

综述了热浸镀铝钢镀铝层的组织、形成机理、生长动力学和扩散后组织的研究现状,指出了热浸镀铝钢今后的研究方向。

A portable corrosion rate meter was used to comparatively measure the annual corrosion rates of 20 steel tube and its integral hot-dip aluminizing coating in acidic and alkali corrosive mediums.

采用便携式瞬时腐蚀速度测量仪,对20钢及其热浸镀铝件分别在酸性和碱性介质中测定年腐蚀速率并进行比较。