gun turning lathe的意思|示意

'

English Word Gun Turning Lathe: Usage Explanation

Gun turning lathe is a machine tool that is mainly used to machine gun barrels. Using this machine tool, gun barrels can be machined with high precision and high surface finish, which is of great significance for the accuracy of firearms.

The gun turning lathe is composed of the main base, the base, the working carriage, the headstock and the tailstock, and the spindle and the servo motor. The main base has a slab that can slide in and out directionally, and the front of the base contains the headstock, the working carriage, which is used to fix the barrel, and the tailstock is used to support the other end of the barrel. The spindle and servo motor perform the rotating motion of the gun barrel relative to the fixed carriage.

The operation steps of the gun turning lathe are as follows: First, place the gun barrel between the headstock and the tailstock, tighten it with the chuck, and move the headstock by the crescent wheel. Second, rotate the spindle and servo motor, and use the cutting tool to enter the working range of the gun barrel to machining it. Third, adjust the parameters of the spindle and servo motor, and use the cutting tool to complete the machining of the barrel. Finally, loosen the chuck, remove the barrel and check the machining accuracy.

In summary, the gun turning lathe is a special machine tool for gun barrel production. It has a high degree of balance, high accuracy and high surface finish. Through the above introduction, I believe everyone can better use the knowledge of gun turning lathe.