deflections的意思|示意

美 / dɪf'lekʃnz / 英 / dɪf'lekʃnz /

n. (尤指击中某物后)突然转向,偏斜,偏离( deflection的名词复数 )


deflections的用法详解

Deflections 是英语中的一个单词,它的定义是:

1. 偏斜,偏离:指某物偏离了正常的方向或轨道,或指某物偏离了原本的路线。

2. 变相,回避:指某人为了回避某事的真相而进行调整或变异。

3. 抵消,抵抗:指某物或某人能够抵消或抵抗来自别的力量、情绪或势力。

deflections在日常生活中使用较为常见,比如:

1. 一架飞机由于外力作用而发生了偏离,可以用deflections来形容,比如The plane had a deflection due to the strong wind.

2. 当当你不想直白回答某个问题,可以用deflections来把问题转移开,比如He tried to avoid the question with deflections.

3. 某人或某物能够抵抗外力和影响,也可用deflections表示,比如The wall has strong deflections to prevent the storm from coming in.

因此,deflections可以用来指某物偏离了原轨道、变相回避、抵抗外力和影响等多种场景,常见的用法可以灵活运用。

deflections相关短语

1、 bending deflection 弯曲挠度

2、 deflection angle 偏转角;挠角;倾斜角

3、 beam deflection 射束偏转;梁的挠度;梁弯曲度

4、 deflection curve 变位(偏离)曲线;挠曲(挠度)曲线

5、 vertical deflection 垂直偏转;帧偏转;高低提前量

6、 deflection coil 偏转线圈;偏向线圈

7、 deflection yoke [电]偏转磁轭

8、 lateral deflection [电]旁向偏转

9、 horizontal deflection 水平偏转,水平偏差;行偏转系数

10、 elastic deflection 弹性挠曲

11、 static deflection 静载挠度;静载弯曲;静态压缩量;静态偏差

12、 deflection method 偏转法;变位法

13、 deflection system 偏转系统

deflections相关例句

Measuring crank deflections for per cylinder, in accordance with diesel works requirements and criterions.

主机各缸臂距差均在主机厂要求的范围内,符合规范的要求.

互联网

We may use the plane stress analysis for determining deflections in the midplane of the beam.

我们可以用平面压力的分析方法来确立梁中间面的挠度.

辞典例句

Vertical elements carry sufficient load through cantilever action to produce cantilever deflections equal to arch deflections.

垂直杆件则借悬臂作用产生和拱挠度相等的悬臂挠度,来承担足够的荷载.

辞典例句

This paper also introduces the stress losses of post - bar and deflections of beams before and anchorage.

文中还介绍了双预应力混凝土梁变形的特点和有关预应力损失问题.

互联网

The only special features allowed are stress stiffening and large deflections.

仅仅应力刚化和大变形是被允许的特殊特征。

They observed the deflections of the particles by allowing them to fall on a fluorescent screen.

他们让粒子落在荧光屏上以观察他们的偏移.

辞典例句

This permits the roller set to align freely in the outer-ring raceway, thus compensating for misalignments and shaft deflections (see Figure 1.43).

这允许设置为自由对齐辊在外圈滚道,从而为失调和轴挠度进行补偿(见图1.43)。

And on the right, you notice that there are many of those sharp deflections.

在右侧,大家看到,有很多明显的变位。