cross-bending的意思|示意

The cross-section distortion of bent tube is very small by using ball filler push bending process, with the ovality less than 1.5%.

运用珠粒填料推弯成形工艺成形出的管材截面畸变程度很小，椭圆度不超过1.5%。

The results showed that the porosity, the gas flux and cross-bending strength decreased, and the pore size distribution had a decrease with the increasing of sintering temperature.

结果表明：随着烧成温度的提高，孔隙率、气体通量及抗弯强度下降，孔径分布变宽。

Moreover, as the radial dimension of the rotary drum or the cross rod is larger, no dart can be formed in the middle bending position of the fabric of the trousers after long-term laying.

此外，由于转筒或横杆的径向尺寸较大，长期搭放不会在裤子布料的中间弯折处造成死褶。

The mechanical model of calculating the bending resist ability of the cross section of the structure and the design method of the...

提出了该基坑支护结构截面抗弯计算的力学模型和设计计算方法。

On the analysis of the velocity and the stress distribution on the asymmetrical cross section ofa orifice, the cause of the bending deformity of a melt thread has been discussed.

分析不对称异形孔中熔体流动速度分布和应力分布，找出细流弯曲畸变的原因。

When a curved beam is bending in the plane of the curvature, the neutral axis of cross section is not identical with the axis of gravity due to the influence of the initial curvature.

由于曲率的影响，曲线梁在其曲率平面内弯曲时的中性轴不通过横截面的形心。因此弯矩在形心处要引起正应力，从而引出所谓“等效轴力”的概念。