conductor to shield的意思|示意

Connect the outer or shield connection of the BNC connector to the outside electrode, then connect the inner conductor of the BNC connector to the inside electrode.

将BNC的外壳或屏蔽连到外电极，然后把BNC连接器的内导体连到内电极。

We have discussed the role of a current-driven shield carrying an equal and opposite current to reduce generated noise by reducing the magnetic field around a conductor.

上文探讨了载流屏蔽体的效果——让包围导线的屏蔽层带有大小相等、方向相反的电流，从而抵消磁场，降低干扰。

The shield conductor of a shielded cable should be connected to the reference potential at the signal-reference node (Figure 4).

电缆的屏蔽层必须单点连接到参考电位，连接点应尽量靠近信号源的参考电位。

To analyze the wires breaking-induced vibrations of long-span power transmission towers, three finite element models of shield wire, conductor wire and tower were established with ANSYS/LS-DYNA.

基于有限元程序ANSYS/LS-DYNA，分别建立以等效弹簧代替塔对线路作用的导线、地线模型和以等效弹簧代替线路对输电塔作用的直线塔模型。