cold setting adhesive的意思|示意

'

Cold setting adhesive是一种用于一般工业用途或机械设备维修的紧固剂，它可以在室温下维持固定性，而不需要任何热量来加固和固定。它也被称为一次性紧固剂，它的使用寿命比有其他热固性剂更长，而且使用非常简单，只需涂抹即可。

使用cold setting adhesive的第一步是将被固定的物体和支撑物进行清洗，以消除表面的油脂、水分或其他污垢，以保证两者之间的联系。然后，用一把抹布将cold setting adhesive均匀地涂抹在物体的表面上，然后将物体和支撑物拼接起来，最后将支撑物和物体固定在一起，待固定剂完全固化后，结构即可形成。

使用cold setting adhesive时需要注意，在涂抹紧固剂之前，要先测试一下，以保证它与物体和支撑物的表面粘合力可以达到满足要求的程度。另外，使用cold setting adhesive时，要注意使用量，一次应使用数量有限，否则可能会使结构变形或崩溃。最后，要注意拼接物体与支撑物的精度，使其能够更有效地吸收cold setting adhesive的力量，从而获得更好的效果。

Cold setting adhesive is a kind of fastener used for general industrial purposes or mechanical equipment repair, which can maintain fixity at room temperature without any heat being used to reinforce and fix it. It is also referred to as disposable fastener, and has a longer service life than other thermosetting fasteners, and its use is very simple, just need to be applied.

The first step of using cold setting adhesive is to clean the object to be fixed and the support to eliminate grease, moisture or other dirt on the surface to ensure the connection between the two. Then, spread the cold setting adhesive evenly on the surface of the object with a rag, and then splice the object and the support together, and finally fix the support and the object together until the fastener is completely cured and the structure is formed.

When using cold setting adhesive, it is necessary to test it first to ensure that the adhesion between the surface of the object and the support can meet the requirements. In addition, attention should be paid to the amount of use when using cold setting adhesive. A limited amount should be used at a time, otherwise the structure may be deformed or collapsed. Finally, pay attention to the accuracy of splicing the object and the support so that it can absorb the power of cold setting adhesive more effectively and obtain better results.