Stress by calculating的意思|示意

In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.

首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。

By theoretical analysing and calculating, we find the short needle valve fuel injector can further decrease the impact stress of the needle valve to the sealed conical surface.

经理论分析和计算发现，短针阀喷油器可以进一步降低针阀对密封座面的冲击应力。

Calculating methods of cracking moment, ultimate moment, stiffness of the beams strengthened by steel plate are offered according to the non-linear relationship between stress and strain of concrete.

根据混凝土的非线性本构关系，提出了粘钢加固梁的开裂弯矩、极限弯矩、刚度的计算方法，并将理论值与试验值进行对比分析。

After calculating with finite element method and photoelastic-test, it shows that the contact stress distribution is not in keeping with the formulas given by some bearing hand books and textbooks.

通过有限元计算及光弹性实验，结果证明，滚针轴承的接触应力分布与轴承手册和教科书中所给出的公式不符。

The interface between two molten polymers, as well as the distribution of flow rate, shear rate and shear stress were obtained by using an iterative calculating scheme .

分析了狭缝口型中的一维复合共挤出流动，叠代计算得到两相界面位置以及速度、剪切速率和切应力的分布。

By this method, it is capable for calculating the initial rock stress, i. e., vertical stress, average horizontal stress, maximum and minimum horizontal stress, in any depth below surface.

该方法弥补了以往各向同性球壳模型的不足，可计算出任意深度的原岩应力状态：铅垂应力、平均水平应力、水平面内最大及最小正应力。