PP-EPDM的意思|示意

美 / / 英 / /

PP-EPDM的网络常见释义

耐高温耐高温（PP-EPDM），160℃

丙 ...天然橡胶总厚度： 110μ米粘钢： 3.4 /厘米断裂伸长： 200% 抗拉强度： 25 /厘米耐高温（油漆） 150°丙耐高温（pp-epdm） 150°丙德莎4657高温布基胶带产品特点：德莎?4657是一个高品位丙烯酸涂层布胶带。

橡胶 ...触角，电动的，和X-射线光电子能谱（XPS）测量已用于研究火焰和氧等离子体预处理的聚丙烯/乙烯 - 丙烯 - 二烯单体橡胶（PP-EPDM）的共混物和乙烯乙酸乙烯酯的表面性质（ EVA）共聚物接枝的含羧基的单体。

PP-EPDM相关短语

1、 PP-EPDM-PE 前扰流板

2、 PP-EPDM-TV 大于

3、 EPDM PP 三元乙丙橡胶

PP-EPDM相关例句

The results showed that it was better for producing the EPDM/PP TPV by selecting a high molecular weight resin, a suitable crosslinking system and optimum mixing conditions.

结果表明：在橡塑表面能相近的条件下，选择分子量大且结晶度高的PP作为基体组分，同时选择具有适宜交联速率硫化体系作为橡胶相的交联组分制备的TPV性能最佳。

The effect of blending time on the properties of reactive PP/EPDM alloy was studied via the analysis of gel content, mechanical properties, melt flow behaviour and morphology.

通过凝胶含量测定、力学性能试验以及熔体流动性能测试等手段，研究了共混（反应）时间对密炼法和挤出法反应性PP/EPDM共混合金性能的影响及其机理。

The results showed that the extrudate with the most smooth surface was obtained when 5 phr of phenolic resin and 50/50 blending ratio of EPDM/PP were used.

结果表明，选择酚醛树脂硫化体系、控制酚醛树脂用量为5 份以及EPDM／PP共混比为50／50，可以得到挤出表面最为光滑的共混物。

The vibration force field strengthens juncture between EPDM and PP, and increases temperature in which macromolecular chains are broken and decomposed, which enhances heat stability of TPE.

振动力场强化了EPDM与PP两相间的结合，使得大分子链段发生断裂和分解所需温度增大，提高了TPE的热稳定性能。

The graft reaction of MAH grafted HDPE, PP and EPDM at various conditions is studied by means of polyolefin grafted MAH in melt via heat initiation.

采用热引发熔融接技方法研究了不同反应条件下马来酸酐(MAH)接枝hdpe、接枝共聚pp及接技EPDM弹性体的接枝反应。

The effects of blending methods and equipments on the properties of short polyester fiber reinforced EPDM/PP blending thermoplastic elastomer were studied.