Injection molded parts的意思|示意

Using average shrinkage rates of injection-molded parts to decide the dimension of mold cavity can not satisfy the demand of high precision injection-molded parts.

采用一般的平均收缩率方法来确定模具型腔的成型尺寸，已难以满足精密注塑成型制品的精度要求。

Pressure thermoformed parts replace injection and structural foam molded parts in moderate volume (250 - 3000 annually) and provide a wide range of colors and textures.

热成型零件更换注射压力和结构发泡成型，成交量适中的（250 - 3000年），并提供了广泛的颜色和纹理。

This paper introduces the experimental studies on the warpage of injection molded strip parts in the design of part structure and mold gate and the selecting of molding conditions and materials.

从制品结构和模具浇口设计、原材料和成型条件的优选诸方面对长条形注塑件翘曲变形进行了系统的试验研究。

However, the error does affect the simulation for the precise or very thin injection-molded parts.

但对于精密注塑件，或者制件很薄，这种误差则会对数值分析产生影响。

The finite model of injection molded parts with microstructure region considering latent heat can approximatively forecast the cavity temperature.

采用考虑结晶潜热的微结构件注射成型有限元模型能较准确地预测制品内部温度场分布。

Effects of different cooling rates and uneven mold temperature on the residual stress inside injection molded parts are studied with the help of numerical methods.

采用数值方法研究了不同冷却速率、不均匀模壁温度对塑件残余应力的影响。