BOlT CYLINDER HEAD的意思|示意

Head gaskets are made of thin sheets of soft metal or of asbestos and metal. All cylinder, water, valve, and head-Bolt openings are cut out.

气缸盖用的密封垫是用软金属薄片或金属和石棉组成的薄片制成，留出所有的气缸孔、水道孔、气门孔和气缸盖螺栓孔。

Through the analysis to the test results, how to set up a reasonable tightening process for cylinder head bolt is expounded.

通过试验分析，阐述了如何合理地制定缸盖螺栓的拧紧工艺。

Generally, the cylinder and the cylinder head bolt together with a thin gasket pressed between them to ensure a good seal.

一般来说，气缸和气缸盖用螺栓紧固在一起，气缸与气缸盖之间用一薄垫圈确保密封良好。

A bolt is fastened through the bush to thereby fix the rocker shaft on a cylinder head.

螺栓穿过衬套被紧固，从而将摇臂轴固定在气缸盖上。

According to the numerical simulation of heavy-duty diesel engine to raise power, two methods to assess the strength of cylinder head bolt, static calculation and fatigue stress check, are introduced.

结合大功率柴油机提升功率的数值计算工作，介绍了评估气缸盖螺栓强度的两种方法：静强度分析法和疲劳强度校核法。

Preload condition, the cylinder head bolt-hole depth of deformation of the cylinder sets a great impact on the proper cylinder head bolt hole depth Shen cylinder l.

预紧工况下，缸盖螺栓沉孔深度对气缸套变形影响很大，适当的缸盖螺栓沉孔深度有利于减小气缸套变形。