- device under test的意思|示意
被测器件在试设备
- device under test的网络常见释义
被测器件 ...析仪中有两种类型的测量接收机，一种是测量激励信号的参 考接收机，用 R 表示 ; 另一种是测量被测器件 (DUT - Device Under Test) 的反射 信号和传输信号的接收机，分别用 A 和 B 表示。
- device under test相关例句
The Modbus network address of the device under test.
测试设备的Modbus网络地址。
Realistic device characteristics can be analyzed under actual operating conditions by varying the test frequency, test signal level, and dc bias.
切合实际器件特性可以分析根据实际营运情况，由不同检测频率，测试信号水平和直流偏置。
If high voltage is used, current limiting resistors are needed to avoid damage to the current switches in case the device under test breaks down.
如果使用高压，则需要利用限流电阻，以免被测装置击穿后损坏电流开关。
Set the serial port connecting the host to the device under test.
将连接主机的串口设置为接受测试的设备。
A disadvantage of the cascade configuration is that the signal may pass through more than one switch contact to the device under test, causing higher losses in the signal.
级联配置的一个缺点是信号要经过多个开关触点才能到达被测装置，会造成信号的损耗更高。
Often, the purpose of the contact resistance test is to determine whether contact oxidation or other surface film buildup has increased the resistance of the device under test.
通常，测试接点电阻的目的是确定接触点氧化或其它表面薄膜积累是否增加了被测器件的电阻。